Connect the main feed directly to the controller’s input terminal, ensuring the neutral wire is secured to the silver screw and the hot line to the black screw. This alignment guarantees stable power delivery across both control points.
Identify traveler wires linking the secondary switch to the primary controller. These conductors must match color codes, typically red and black, to maintain consistent signal flow between the two locations.
Attach the load wire to the brass terminal on the controller, confirming the fixture receives uninterrupted current. Verify tight connections to prevent flickering or voltage drop that can affect performance.
Use a voltage tester at each terminal before restoring power to confirm continuity. Testing both switch positions ensures the controller responds correctly from either location.
Label all terminals with tape or markers after installation. Clear identification simplifies future maintenance and reduces the risk of misconnection when adjustments or replacements are required.
Inspect grounding connections on both switches and the controller housing. A secure ground reduces the risk of electrical faults and enhances safety for the entire circuit.
Dimmer Installation and Dual Switch Configuration
Connect the incoming hot line to the black terminal on the controller and secure the neutral wire to the silver terminal. Ensure the load wire from the fixture is fastened to the brass terminal to maintain proper current flow and avoid flickering.
Link the traveler wires between the main control unit and the secondary toggle. Match color codes, usually red and black, and tighten all connections to prevent intermittent operation. Test each switch by toggling positions to confirm full functionality.
Verify the ground connection on both switches and the controller housing. Proper grounding prevents electrical hazards and stabilizes voltage delivery across the entire setup, improving safety and longevity of the lighting assembly.
Identifying Dimmer Terminals and Wire Functions
Connect the incoming live feed to the black terminal and the neutral line to the silver terminal. The load wire from the fixture attaches to the brass terminal. These connections control current flow and prevent flickering or overloading during operation.
The traveler wires linking the primary and secondary switches are usually red and black. Ensure they match color coding on both terminals, and secure the ground wire to the green screw. Proper identification guarantees stable control and prevents short circuits.